Radio Shack ET-1106 owner manual Connecting the Phone

Page 9

43-1106.fm Page 9 Wednesday, April 26, 2000 10:30 AM

CONNECTING THE PHONE

Follow these steps to set up and connect the base.

1.Plug one end of the supplied modular cord into the TEL. LINE jack on the bottom of the base.

2.Plug the supplied AC adapter’s L-shape barrel plug into the 9V DC jack on the bottom of the base.

3.Press the modular cord into the left groove and the adapter’s cord into the right groove on the bottom of the base.

4.Plug the modular cord’s other end into a modular phone line jack.

5.Plug the adapter into a standard AC outlet.

Installation		9

Image 9

Contents ET-1106 900 MHz Digital Cordless Telephone Contents Troubleshooting Care Features Fm Page 5 Wednesday, April 26, 2000 1030 AM Important Caller ID Information FCC Statement Read this Before InstallationSelecting a Location InstallationConnecting the Phone Preparation Connecting and Charging the Battery PackPreparation Installing the Backup Battery Pack Using the Belt Clip Using a HeadsetSetting Up the Phone Setup MenuChanging the Ringer Type Setting the Ringer Volume Setting the Keyclick Setting the Dialing ModeOperation Making and Receiving CallsPre-Dialing Using Redial Adjusting the HANDSET’S VolumeFm Page 19 Wednesday, April 26, 2000 1030 AM Using Mute Using FlashUsing Tone Services on a Pulse Line UsingMemory Dialing Storing a Number in Memory Entering a Pause in a Memory Number Reviewing Numbers Stored in Memory Dialing a Stored NumberDeleting a Number from Memory Delete SPD? 0 = YES OFF = NO. appears Storing Chain Dialing Service NumbersDisplayed Call Information Testing Stored Emergency NumbersBase Paging Hand Caller ID Operation Caller ID Messages Call WaitingReviewing Caller ID Records Dialing Numbers from Caller ID Record Deleting Caller ID Records Clear ALL Memory Problem Solution TroubleshootingOFF Care Replacing the Battery PackFCC Wants YOU to Know Important InformationLightning Fm Page 39 Wednesday, April 26, 2000 1030 AM Limited One-Year Warranty