Radio Shack owner manual Care

Page 31

Problem

Suggestion

 

 

 

 

You have an incoming call, but do not

Let the phone ring twice before you answer so the system

receive any Caller ID information.

has time to record the Caller ID information.

 

 

 

Check that the system is correctly and securely connected.

 

 

 

Call your phone company to verify that your Caller ID ser-

 

vice is active.

 

 

The handset battery pack does not

Check the charging contacts on the handset and base. If

charge.

they are dirty, clean them with a pencil eraser.

 

 

 

Be sure the battery pack is connected correctly.

 

 

 

Replace the battery pack.

 

 

The TAD does not answer calls.

Make sure the TAD is turned on.

 

 

 

Make sure the AC adapter is properly connected.

 

 

 

Check all phone line connections.

 

 

The TAD does not record callers’ mes-

The recording time is set to announcement only. Set it to 1

sages.

or 4.

 

 

 

Delete messages if memory is full.

 

 

If you still have problems, disconnect the TAD. If other phones on the same line work properly, the fault is in this phone or its installation. If you cannot find the problem, take your system to your local RadioShack store for assistance.

CARE

Keep the phone dry; if it gets wet, wipe it dry immediately. Use and store the phone only in nor- mal temperature environments. Handle the phone carefully; do not drop it. Keep the phone away from dust and dirt, and wipe it with a damp cloth occasionally to keep it looking new.

Modifying or tampering with the phone’s internal components can cause a malfunction and might invalidate its warranty and void your FCC authorization to operate it. If your phone is not performing as it should, take it to your local RadioShack store for assistance. If the trouble is affecting the telephone lines, the phone company can ask you to disconnect your phone until you have resolved the problem.

Troubleshooting

31

Page 30 Page 32
Image 31
Page 30 Page 32
Contents MHz Digital Spread Spectrum Cordless Phone FCC Statement Read This Before InstallationImportant Caller ID Information Important Safety InstructionsLightning Battery Safety Instructions Save These Instructions Contents Troubleshooting Features On a Desk InstallationChoosing a Location Mounting the SystemOn a Wall CONNECTING, CHARGING, and Replacing the Battery PackSetting the Dialing Mode Setting Auto Talk Setting the HANDSET’S Ringer TONE/VOLUMETurning the BASE’S Ringer ON/OFF Storing Your Area Code Turning Caller ID/CALL Waiting ON/OFFQuick Look AT the Handset Telephone OperationFWd Quick Look AT the BaseMemory Dialing Switching Between the Handset and the SpeakerphoneUsing Both the Handset and the Speakerphone Using a Headset∗ ç ¶ý& âýá space &ý Editing or Deleting a Number in MemoryReviewing Memory Numbers Chain-Dialing Service NumbersTesting Stored Emergency Num- bers Entering a PauseUsing Call Waiting Options Call Waiting Options ServiceCaller ID Operation Using Conference Using Ask to HoldReviewing Caller ID Records Deleting Caller ID Records ADDING/DELETING the Area CodeDialing Numbers from Caller ID Records Storing a Caller ID Number in MemoryCaller ID Operation Answering System Operation Using the Menu ButtonSetting the DAY and Time Setting the Number of RingsSelecting the Outgoing Message Setting the Record TimeRecording/Deleting an Outgoing Message Recording Incoming Messages Setting the TAD to Answer CallsUsing the Mail Boxes Screening CallsRecording a Conversation Recording a MemoPlaying Messages Deleting Messages Adjusting the TAD’S VolumeSetting the Security Code Using the Toll-SaverDeleting All the Messages in a Mail Box Using Remote CommandsCalls Setting the TAD to Answer CallsSetting the TAD Not to Answer Recording a New Outgoing MessageProblem Suggestion TroubleshootingCare Limited One-Year Warranty
Top Page Image Contents