Radio Shack TAD-728 Setting Dialing Mode, Setting the Ringers, Turning the Ringers On or Off

Page 14

43-728.fm Page 14 Thursday, August 26, 1999 8:53 AM

•The supplied battery pack should last for about a year. When it loses its ability to fully recharge, order a replacement battery pack from your local RadioShack store (see “Replacing the Battery Pack” on Page 42).

If the dial tone stops, you have touch- tone service. Leave PULSE/TONE set to TONE.

If the dial tone continues, you have pulse service. Set PULSE/TONE to

PULSE.

SETTING THE

DIALING MODE

Set PULSE/TONE on the back of the base for the type of service you have. If you are not sure which type you have, once the battery pack is fully charged, do this test.

1.Be sure PULSE/TONE is set to

TONE.

2.Lift the handset, press TALK, and listen for a dial tone.

3. Press any number other than 0.

Note: If your phone system requires that you dial an access code (9, for example) before you dial an outside number, do not dial the access code either.

14

SETTING THE RINGERS

Turning the Ringers On or Off

You can turn the ringers on the base or handset on or off.

Use RINGER OFF/ON on the base to turn the ringer on the base on or off.

Use RINGER OFF/ON on the handset's left side to turn the handset’s ringer on or off.

Notes:

•The handset does not ring when it is on the base, even when RINGER OFF/ON is set to ON.

•If you turn off the ringer, you can still make calls (and answer calls if you hear another phone on the same line ringing).

Page 13 Page 15
Image 14
Page 13 Page 15
Contents TAD-728 With Caller ID/Call Waiting ID and Digital Answering SystemFeatures Telephone FeaturesTAD Features Important Caller ID Information Read this Before Installation FCC StatementImportant Safety Instructions Installation Contents Replacing the Battery Pack FCC Wants You to Know On a Desk InstallationMounting the Phone On a Wall Plate or Wall Connecting Charging Battery Pack Charge! Battery low flashes on Turning the Ringers On or Off Setting Dialing ModeSetting the Ringers Setting the Handsets Ringer Volume Using Auto TalkSetting Caller ID/ Call Waiting ON/OFF Options On and OffStoring Your Area Code Using Redial Adjusting Handset VolumeOUT-OF-RANGE Signal Telephone OperationUsing Flash Using the IntercomPaging from Handset to the Base Using the DirectoryPaging from Base to the Handset Storing a Name and NumberDialing a Stored Number Editing an EntryDeleting an Entry Using a HeadsetTesting Stored Emergency Numbers Entering a PauseFm Page 22 Thursday, August 26, 1999 853 AM Call Waiting Options Caller ID OperationReviewing Caller ID Records Callers ListSaved calls = Reviewing the Callers ListNo calls New calls =Storing a Caller ID Record in the Directory Dialing Numbers Using the Callers ListDeleting Caller ID Records Shows No callsPrivate number Unknown name Caller ID MessagesPrivate name Unknown number Forwarded callUsing Call Waiting Options Services Switch Caller option againCall Waiting Options TAD Operation Using the Handset to Control the TADSetting the Number of Rings Setting the DAY Time Selecting AN Outgoing Message Setting the TAD to Answer Calls Screening Calls Recording a MemoPlaying Messages Using the HandsetUsing the Base Adjusting the Tads Volume Deleting MessagesRemote Operation Using the TOLL-SAVERAccessing the TAD Remotely Delete the current Troubleshooting Recharge! Battery lowFm Page 39 Thursday, August 26, 1999 853 AM Set REC Time to 1 or Care and Maintenance Replacing Battery Pack FCC Wants YOU to Know LightningRadioShack

TAD-728 specifications

The Radio Shack TAD-728 is a versatile and user-friendly cassette answering machine that gained popularity in the late 20th century. Designed with both functionality and convenience in mind, the TAD-728 is a staple for those who relied on analog technology for their communication needs.

One of the main features of the TAD-728 is its ability to record and store incoming messages onto cassette tapes. This analog medium not only provided a robust sound quality but also made it easy for users to manage their messages, as one could quite literally see the tape running. The device boasts a maximum record time of around 30 minutes, offering ample time for users to receive and store their messages.

The TAD-728 is equipped with a built-in microphone, allowing users to record personal announcements or messages. This feature was especially useful for businesses wishing to convey specific information to callers. Additionally, the machine includes an adjustable volume control, enabling users to customize the playback according to their environment.

Subscribers of the TAD-728 could also benefit from its call screening feature. This capability allowed users to listen to incoming messages as they were being recorded, thereby giving them the option to pick up the call if necessary. Such a feature not only enhanced communication but also provided a sense of control over incoming calls, a crucial aspect for both personal and business use.

The TAD-728 is powered by standard AA batteries or can be plugged directly into a power outlet, making it a portable and flexible solution for various settings. Its compact design, with a lightweight build, ensured that it could fit seamlessly into any home or office space without taking up too much room.

In terms of technology, the TAD-728 incorporates reliable tape technology that was standard in the late 80s and early 90s. It is compatible with various cassette tape formats, affording users the choice of using different brands or tape types depending on their preference.

Overall, the Radio Shack TAD-728 remains a significant piece of technology, characterized by its straightforward design and practical features, providing users with an effective solution for managing their communications in an era before digital dominance. Its legacy epitomizes a time when answering machines were an integral part of home and business life.
Top Page Image Contents