Radio Shack TAD-728 owner manual Dialing a Stored Number, Editing an Entry

43-728.fm Page 20 Thursday, August 26, 1999 8:53 AM

3.To enter the name, use the dialing buttons. The character chart below shows you which dialing buttons control each character. Repeatedly press a dialing button until the char- acter you want appears on the dis- play.

Press to select lowercase letters,

and press to select uppercase letters.

Press to move the cursor to the left. (If you make a mistake, move the cursor over the error, then press DELETE and enter the correct char- acter.)

Press # to move the cursor to the right and enter the next character.

4.When you finish entering all charac- ters, press DIRECTORY.

5.Enter the phone number and any tone or pause entries (see “Using Tone Services on a Pulse Line” on

20

Page 18 and “Entering a Pause” on Page 21).

6.Press DIRECTORY. The phone beeps and Saved directory appears.

7.Repeat Steps 2–6 to store other names and numbers.

Note: If 30 numbers have already been stored, the display shows Directory full when you hold down DIRECTORY in Step 1.

Dialing a Stored Number

1.Press DIRECTORY.

2.Press or to scroll through the directory. To find a name quickly using its first letter, press the num- ber key that corresponds with the letter. For example, to find a name starting with D, press 3 once. The display shows the first listing of the names starting with D. To find a name starting with E, press 3 twice.

3.Press TALK. The number on the dis- play is automatically dialed.

Editing an Entry

1.Press DIRECTORY.

2.Press or to display the number you want to edit.

3.Press EDIT/REDIAL/P.

4.Edit the record as described in Steps 3–6 of “Storing a Name and Number” on Page 19.