Beyond the Basics
3.To answer a DirectLink call, press /FLASH. (If Any Key Answer is on you can also press any key on the
Exiting DirectLink™ Communication
While the handset is using DirectLink communication, the display shows DIRECTLINK MODE; this means the handset cannot make or receive normal phone calls. To exit DirectLink communication and return to normal standby, simply return the handset to the cradle, or press MENU/CLEAR followed by SELECT/ . DIRECTLINK MODE CANCEL appears in the display.
Using the Intercom
You can use the intercom to talk to another station without using the phone line.
Making an Intercom Page
From the base | From the handset | ||||
1. With the phone | 1. | With the phone | |||
in standby, press |
| in standby, press | |||
HOLD/INTCOM/ |
| INTCM/XFER. | |||
XFER. | 2. | Use | or | to | |
2. Press 1 through 4 to | |||||
| select the station | ||||
select the handset |
| you want to talk | |||
you want to talk with |
| with, then press | |||
or press */TONE to |
| SELECT/ | . Select | ||
page all stations. |
| ALL to page all other | |||
|
| stations paged. | |||
|
|
|
|
|
68