Radio Shack ET-1102 owner manual Important Caller ID Information

Page 3

43-1102.fm Page 3 Tuesday, August 17, 1999 4:37 PM

Flash — sends an electronic switch- hook signal for use with special phone services, such as Call Waiting.

Tone/Pulse Dialing — lets you use ei- ther type of service, and you can easily switch from pulse to tone dialing for long-distance,bank-by-phone, or other special services.

Auto Talk — you can set the phone so you can answer a call simply by lifting the handset from the base.

Any Key Answer — you can set the phone so you can press any key to an- swer a call when the handset is away from the base.

Hearing-Aid Compatibility — lets you use your phone with hearing aids that have a T (telephone) switch.

This telephone has been tested and found to comply with all applicable UL and FCC standards.

We recommend you record your phone’s serial number here. The num- ber is on the bottom of the base.

Serial Number __________________

Important Caller ID Information

To use the phone’s Caller ID and Caller ID with Call Waiting features, you must be in an area where those services are available and you must subscribe to those services through your local phone company.

Where Caller ID is offered, one or more options are generally available:

caller’s number only

caller’s name only

caller’s name and number

Warning: To prevent fire or shock hazard, do not expose this product to rain or moisture.

 

CAUTION

!

 

 

 

RISK OF ELECTRIC SHOCK.

 

DO NOT OPEN.

 

 

 

 

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER OR BACK. NO USER-SERVICE- ABLE PARTS INSIDE. REFER SERVIC- ING TO QUALIFIED PERSONNEL.

This symbol is intended to alert you to the presence of uninsulated danger- ous voltage within the product’s enclo- sure that might be of sufficient magnitude to constitute a risk of elec- tric shock. Do not open the product’s case.

This symbol is intended to inform you

!that important operating and mainte- nance instructions are included in the

literature accompanying this product.

3

Image 3
Contents ET-1102 Redial lets you quickly redial the last number dialed FeaturesImportant Caller ID Information FCC Statement Read this Before InstallationContents Installation Mounting the PhoneOn a Desk On a Wall Plate Directly on the Wall Connecting and Charging the Battery Pack Charge Indicator Setting the Dialing Mode Setting the RINGER’S Volume Using Auto TalkTurning Caller ID/ Call Waiting ON/OFF Storing Your Area Code Making and Receiving Calls Adjusting Handset VolumeUsing Redial Telephone OperationPaging Using FlashStoring a Name and Number in Memory Memory DialingPress SELECT. Store Number ap- pears Editing or Deleting a Number in MemoryEntering a Pause Reviewing Memory NumbersDialing a Memory Number Using a Headset Chain-Dialing Service NumbersTesting Stored Emergency Numbers Reviewing Caller ID Records Caller ID OperationCaller ID Messages Storing a Caller ID Record to MemoryDeleting Caller ID Records Troubleshooting Fm Page 24 Tuesday, August 17, 1999 437 PM Care and Maintenance Replacing Battery Pack Lightning FCC Wants YOU to KnowRadioShack