Radio Shack ET-687 owner manual Using PAGE/INTERCOM

43-687.fm Page 19 Friday, August 13, 1999 11:12 AM

3.When the service answers, press TONE ( ). Any additional numbers you dial are sent as tone signals.

4.When you hang up, the phone auto- matically resets to pulse dialing.

USING PAGE/INTERCOM

You can use the ET-687 as a two-way pager and intercom between the base and the handset. This is useful if the handset is away from the base and you want to lo- cate it, or if you want to have a conversa- tion between someone with the handset and someone at the base.

To page the base from the handset, press INTCM. The base and handset ring. Press INTERCOM on the base to an- swer the page. Both line indicators on the handset light, and the CHARGE indi- cator on the base lights.

To page the handset from the base, press INTERCOM. The handset and base ring. Press INTCM on the handset to an- swer the page. Both line indicators on the handset light, and the CHARGE indi- cator on the base lights.

To end an intercom call, press INTCM on the handset, press INTERCOM on the base, or hang up the handset.

During a call, you can page someone at the base or the handset. Press INTER- COM (on the base) or INTCM (on the handset). The current call is put on hold.

•To transfer the call, press INTER- COM or INTCM again when the per- son at the handset or base answers.

•To start a three-way call, tell the per- son at the base or handset to press LINE 1 (or LINE 2), then press the same button twice on your keypad when they answer the page.

Notes:

•You cannot page the base or hand- set if it is already in use. You will hear a warning tone.

19