Press FUNC three times to dial the long distance prefix and local number
Press FUNC four times to dial the area code and local number
4.Press REDIAL/CALL BACK. The system dials the caller’s phone number.
Storing a Caller ID Record in Memory
1.Make sure the CHARGE/IN USE/MES- SAGE indicator is not lit.
2.Press CID/VOL 8 or 9 to find the desired caller ID record. The caller ID memory shows the phone number with area code.
3.Press FUNC to store the number as specified in Step 3 of “Dialing a Number from a Caller ID Record.”
4.Press MEM once. SELECT MEMO
5.Enter the memory location number. The handset sounds two long beeps.
Notes:
•If the handset sounds three short beeps, the caller’s number is not stored. Start again from Step 1.
•You cannot store a Caller ID record with- out the caller’s number or name in the phone’s memory.
Deleting Caller ID Records
1.Make sure the CHARGE/IN USE/MES- SAGE indicator is not lit.
2.To delete a single record, repeatedly press VOL/CID 8 or 9 to find the
desired number, then press FLASH/ DELETE. ERASE CALL ID? appears.
To delete all records, hold down FLASH/ DELETE for 3 seconds. ERASE ALL? appears.
3.Press FLASH/DELETE again to confirm the deletion. The handset sounds two long beeps and the selected number is deleted.
Or, press any button other than FLASH/ DELETE to cancel the deletion. The handset sound three short beeps.
14 | Operation |