Mounting the Base
Directly on the Wall
For this mounting method, you need two wood screws (not supplied) with heads that fit into the keyhole slots on the bottom of the base.
1. Drill two holes 315/16 | |
inches apart. Then | |
thread a screw into | |
each hole, | letting 315/16 |
the heads | extend |
about 5/16 inch from | |
the wall. | 5/16 |
2.Plug one end of the supplied short modular cord into the LINE jack on the back of the base.
| DC12V | LINE |
T P |
|
3. Insert the supplied power adapter’s barrel plug into the DC 12V jack on the back of the base.
| DC12V | LINE |
T P |
|
8
4.Route the adapter’s cord through the strain relief slot on top of the base.
Strain Relief Slot
5.Align the keyhole slots with the mounting screws and slide the base downward to secure it.
LINE
OFF
RINGER
ON
6.Plug the adapter into a standard AC outlet.