Connecting and Charging the Battery Pack

43-1048.fm Page 7 Tuesday, August 17, 1999 12:45 PM

3.Plug the supplied AC adapter’s barrel plug into the DC 12V jack on the back of the base.

4.Plug the adapter into a standard AC outlet. The IN USE/CHARGE indica- tor lights when the keypad is on the base.

5.Lift the base’s antenna to a vertical position.

CONNECTING AND CHARGING THE BATTERY PACK

The ET-548 comes with a rechargeable nickel-cadmium battery pack in the re- mote keypad. You must connect and then charge the battery pack for at least 15 hours before you use it the first time.

1.Use a Phillips screwdriver to remove the screw that secures the battery compartment cover, then remove the cover.

2.Slide the battery pack’s connector onto the connector pins inside the battery compartment.

Illustration

3.Replace the cover and secure it with the screw.

4.To charge the battery pack, place the remote keypad on the base. The IN USE/CHARGE indicator on the base lights.

Illustration