ATTACHING THE HEADSET HOLDER
Put the headset holder into the slot on the back of the base and slide it into place.
Illustration
ADJUSTING THE HEADSET
1.Put on the headset, and adjust the band until it rests with almost no pres- sure on your ear and the top of your head.
Illustration
If the headset is loose, remove it and gently push the headset band inward
slightly to tighten it. If the headset is tight, gently pull the headset band out to loosen it.
2.Hold the headset in place, and turn the microphone boom until it is about 2 inches from your mouth.
Illustration
When you are not using the headset, place it on the headset holder.
Illustration
9