5.Plug the modular cord into the wall plate jack, then align the bracket’s keyhole slots with the wall plate studs and slide the base downward to secure it.
6.Plug the adapter into a standard AC outlet.
Directly On a Wall
For this mounting method, you need two screws (not supplied) with heads that fit into the keyhole slots on the bottom of the base.
15 |
|
|
|
| 5/16" | ||
1. Drill two holes 3 /16 |
|
|
|
|
|
|
|
inches (100 mm) |
|
|
|
|
|
|
|
apart. Then thread a |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
screw into each hole, | 3 | 15/16" |
|
|
|
| |
letting the heads ex- |
|
|
|
|
|
|
|
tend about 5/16 inch (8 |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
| |
mm) from the wall. |
|
|
|
|
|
|
|
2.Insert the bracket’s tabs into the base’s lower tab slots as shown, then press down on the bracket’s clips and insert them into the clip slots.
7.Press and lift out the handset hold- er, rotate it 180× , then snap it back into place.
Tabs
Lower
Tab
Slots
Clip Slots
8.Lift the base’s antenna to a vertical position.
3.Plug one end of the supplied long modular cord into the TEL LINE jack on the back of the base.
8