6.Press MEM or SELECT. The cursor flashes indicating that the display is ready for the number to be edited.
7.Use the number key, 
/TONE/<, #/>,
PAUSE/REDIAL or CH/DELETE to edit the phone number. The phone number cannot exceed 20 digits.
If you don’t want to change the phone number, skip this step.
8.Press MEM or SELECT. If you changed either name or phone number, a confirmation display shows up. If it is
correct, press 
VOL key to select
“Yes” and press SELECT. You hear a confirmation tone. The memory storage is complete.
For example, if you store a name and
number into memory location number 01, the display shows ¨Memory01 Stored¨. After about two seconds, Select Memory screen is displayed.
9.Press END to return to the standby mode.
ERASING A STORED NAME AND PHONE NUMBER
1.Press MEM, ¨Select Memory¨ is displayed.
2.Press 
VOL or 
VOL keys, or enter a number (0 - 9) to select the memory location you would like to erase.
3.Press MEM or SELECT.
The screen appears with the memory location number that you have selected in the display.
Memory Dialing
25