Using Hold, Conference Transfer and Intercom

Using Hold, Conference,

	Press INT’COM/HOLD. If you leave a caller
Put a call on hold	on hold for more than five minutes, the call
	will be disconnected. To return to the party
	on hold, press		/FLASH or		.

	To join a call already in progress, press
Join a call in	/FLASH or		. You can hang up
progress	normally; the other station remains
	connected to the call.

	Press INT’COM/HOLD; the call will
	automatically be placed on hold. Use
	or	to select the station you want to
	transfer the call to, and press the OK soft
Transfer a call	key. (To page all stations at once, select
	ALL.) When the other station answers,
	you can talk to the station; the outside
	call remains on hold. If the other station
	accepts the call, you will be disconnected.

Cancel a transfer	To cancel the transfer and return to the
	call, press /FLASH or			.


	To answer the page and speak to the
Accept a	transferring station, press				/FLASH or
transferred call	INT’COM/HOLD. To accept the call and
	speak to the caller, press			/FLASH again.