you finish, disconnect the power supply from AC power before you disconnect the power cord from the
If batteries are installed for portable use, make sure NI/AL inside the battery compartment is set to the correct position (see “Using Batteries” on Page 7).
Follow these steps to connect the
1.Connect the Adaptaplug adapter to the power supply’s cord, setting TIP to + (positive).
2.Plug the barrel plug into the
3.Connect the other end of the power cord to your vehicle’s
4.Plug the power supply into a standard AC outlet, then turn on the power supply before you turn on the
CONNECTING THE ANTENNA
Caution: To prevent damage to your
Follow these steps to attach the supplied flexible an- tenna to your
12