INSTALLATION INSTRUCTIONS (continued)
Connecting to an Audio Visual Device (continued)
When the "ANT" terminal is connected to outdoor antenna instead of CATV system, please note that a good antenna adaptor is necessary. See the diagram on the right.
Precautions when connecting the antenna
•Clamp section A using pliers when installing the coaxial cable. If other types of adaptors are used, be sure that the core and shielding are good.
•Please use a coaxial cable which is free from interference to connect the antenna. Avoid using a parallel flat feeder wire as interference may occur, causing reception to be unstable and stripe noise to appear on the screen.
•Avoid using indoor antenna as this may be affected by interference. Please use CATV net or outdoor antenna.
•Keep the power cord as far away from the antenna wire as possible.
•For safety, install an external antenna conforming to AS1417.1 (applicable for Australia only)
If there are noise appearance in the picture of
ENGLISH
15
