Hitachi 42PD7800, 32PD7800 user manual Function Menu

OPERATING INSTRUCTIONS (continued)

FUNCTION MENU

AV monitor only

ENGLISH

MENU

Picture

Audio

Timer

Function

Setup

Language

Select

OK Set

Function
	Screen Saver		Off
	Screen Wipe		On 60Min.
	Black Side Panel		Off
	Video Power Save		Off
	Freeze Mode		Split
	Default Zoom		Panoramic
	Panel Life		Nomal
	Luminance Manager		Off
	Slide Interval		5Sec.
	Reset		Reset
	Select	Set	Return

Function
Mode Display		Off
ID Number		1
Inverse		On 60Min.
Standby White		Off
Gamma		2.2
Reset		Reset
Select	Set	Return

Selected characters

Setup hint

This moves the picture around the screen in small amounts, at set

Screen Saver

Off

5Min.

10Min.

intervals, to reduce the panel image retention. This is where station-

60Min.

40Min.

20Min.

ary objects, such as screen logos, leave a slight image visible after

they should have disappeared.

This is used to reduce the panel image retention that can occur with

stationary pictures by the white field signal. Select On (continuous

Screen Wipe

On

60Min.

operation) or 60 Min. (time limit operation) and press the OK button.

Press the MENU or RETURN button on the remote control to return to

normal viewing.

This turns the gray sidebars to the black sidebars when watching

Black Side Panel

Off

On

normal mode screen size area. It is always set to Off when the monitor

powered On. It is recommended to set to Off to reduce the panel

image retention. This is not available for the photo input function.

Off

On

This is used to reduce power consumption for video input when there

Video Power Save

is no video signal. Setting it On will lead the monitor to the standby

mode when the AV input with no signal is selected.

Split

Strobe

This selects the display condition of the FREEZE mode between Split

Freeze Mode

(2 pictures) and Strobe (12 pictures). This is grayed out and not

available in the AV monitor.

Panoramic

4:3

This selects the screen display size of TV input that appears first

Default Zoom

when the main power turned on. This is grayed out and not available

in the AV monitor.

This function is to suppress the contrast of the screen regardless of the

Normal

Extend 1

Extend 2

Contrast setting in the Picture Menu. By this control, power consumption

Panel Life

can be reduced or degradation of a panel can be mitigated. The order

of power consumption is Extend 2 < Extend 1 < Normal.

If the Contrast setting is changed when this item is set to Extend 1 or

2, it will be changed to Normal automatically.

Off

On

This is used to reduce the panel image retention which is caused by

Luminance Manager

especially displaying TV station logo.

Brightness of 4 corners of the panel get lower than the center.

Slide Interval

5Sec.

10Sec.

30Sec.

This is used to display images at set intervals during slide show.

(37/42 only)

Reset

(off the function)

(waiting to reset)

The original factory settings for the items of this Menu page can be

restored by pressing the OK button.

This can display the Input Signal Screen Display every time the input

Mode Display

Off

On

mode and signal mode are changed.

Set to OFF if the Input Signal Screen Display is not needed when

switching signals.

ID Number

1

2

3

4

Assigns ID numbers to the monitors so that they can be controlled

7

6

5

individually (up to 7 monitors can be controlled).

This function can change each level if RGB signal invert to reduce

Inverse

On

60Min.

the panel image retention. When this function is required to use,

select On (continuous operation) or 60Min. (time limit operation) and

press OK button. And press the Menu or return button to exit.

Off

15Min.

30Min.

This function is also provided against the image retention. If time is

Standby White

set for this item, the screen changes into the white pattern when the

120Min.

60Min.

monitor enters power save mode, and it will continue for the period of

setting time.

Gamma

2.2

2.8

Normally set to 2.2.

39