INSTALLATION INSTRUCTIONS (continued)
Mounting the Side Input
• With the speaker unit
1.Mount the side input into the speaker holder.
Hook the clamps (4 pieces) of the speaker holder into the holes as shown in the figure and pull them down until it sounds click. Fasten the side input with the speaker holder by the screws.
Refer to 14 about the connection of side input.
See the below figure how to treat the cable.
Clamp (32)
Side input
Speaker holderScrew x 1
Screw hole Side input | Clamp (42, 37) | Clamp (42, 37) |
32 inch | 42 inch | |
• Without the speaker unit | 37 inch | |
|
| |
1. Attach the holder for the side input.
Holder
Screw x 2
Screw hole
2.Mount the side input into the securing holder.
Fasten the side input with the speaker holder by the screws. See the below figure how to treat the cable.
ENGLISH
Clamp (32) |
Side input
32 inch
Clamp (42, 37)
42inch
37inch
19
