OTHER FUNCTIONS (continued)
DVD Player/STB Selection (continued)
Set up hint
Example) HITACHI DVD
To operate HITACHI DVD player, press and hold the 
button, followed by the button.
1.Press 
button to indicate the lamp of DVD on the remote control.
During LED lighting, press | and to set up the maker. | |
2. Release the button once while keeping | button, press | |
the button again to set the maker type. |
| |
*After set up the maker type, press the button related with DVD, and make sure that DVD player is working. In case DVD player does not work, repeat 1 and 2 with other numbers for the maker type to make sure it. (In this example, press or .)
NOTE
•Not all models of the listed makers can be operated using this remote control.
ENGLISH
Signal Check (RGB mode)
Changes in the signal status are displayed on the screen as they arise.
Status | Display |
| Action | |
|
|
|
|
|
When Mode Display is set to ON, | A guide is displayed for the input |
|
|
|
the input signal is switched or | terminal and the horizontal and |
|
|
|
when the RECALL button is | vertical sync frequency. |
|
|
|
pressed. |
|
|
|
|
|
|
|
|
|
When the sync signal is no | • A guide displays No Sync. | Recheck the personal computer | ||
longer detected. | Signal, and Power Save (for | power switch status and the | ||
| approx. 5 sec.) | connection status. | ||
| • When the condition continues |
|
|
|
| where the sync signal cannot |
|
|
|
| be detected, indicator lamp of |
|
|
|
| power source changes in |
|
|
|
| orange and the mode switches |
|
|
|
| to power save mode. |
|
|
|
|
|
|
|
|
When the input signal does not | A guide displays Invalid Scan | Recheck the input signal | ||
match the monitor specifications | Freq. | specifications. | ||
or is in an unstable status. |
| 54 ~ 57 | ||
|
| |||
|
|
|
|
|
RGB
RGB2
RGB
H : 48.4kHz
V : 60.1 Hz
OFF
! No Sync. Signal
! Invalid Scan Freq.
49
