Hitachi 42PD7800, 32PD7800 user manual Off 1280x768 1366x768, RGB1 DVI-PC

OPERATING INSTRUCTIONS (continued)

SETUP MENU (RGB mode: RGB1 (DVI-PC), RGB2 (RGB))

	Picture	Setup
	Audio	Auto Adjust		Adjust
	Timer	Horizontal Position		0
MENU	Function	Vertical Position		+ 31
	Setup	Horizontal Clock		– 20
	Language	Clock Phase		10
	Select	Reset		Reset
	OK Set	Select	OK Set	Return

Horizontal Position		0
Next / Prev	Adjust	Return

ENGLISH

Setup
	Auto Adjust		Adjust
	Horizontal Position		0
	Vertical Position		+ 31
	Horizontal Clock		– 20
			10
	Clock Phase
	Reset		Reset
	Select	OK Set		Return

Setup
Input Level		0.7V
Frequency Display		Off
WVGA Type		Off
WXGA Mode		Off
Vertical Filter		On
Frequency Mode		Movie
RGB1		DVI-PC
RGB2		RGB
Select	Set	Return

Clock Phase		10
Next / Prev	Adjust	Return

Selected characters

Setup hint

Adjust

Horizontal Position, Vertical Position, Horizontal Clock and Clock

Auto Adjust*

–

Pressing the OK button here,

Phase are adjusted automatically.

Automatic regulation is started.

Moves the horizontal position

Moves the horizontal position

Adjust the left-side display position.

Horizontal Position

to left.

to right.

Screen display changes to Magenta color if beyond the available

range. (This function is only for RGB2. It’s not available (grayed out)

for RGB1 (DVI-PC).)

Moves down the vertical posi-

Moves up the vertical position.

Adjust the vertical display position.

Vertical Position

tion.

Screen display changes to Magenta color if beyond the available

range. (This function is only for RGB2. It’s not available (grayed out)

for RGB1 (DVI-PC).)

Reduces the dot clock fre-

Increases the dot clock fre-

Adjust for maximum character clarity.

quency (shrinks the right side).

quency

(expands the right

Horizontal Clock

side).

(This function is only for RGB2. It’s not available (grayed out) for

RGB1 (DVI-PC).)

Slows the dot

clock phase

Advances the dot clock phase

Adjust for clear character visibility.

(shifts slightly to left).

(shifts slightly to right).

Clock Phase

(This function is only for RGB2. It’s not available (grayed out) for

RGB1 (DVI-PC).)

Reset

(off the function)

(waiting to reset)

The original factory settings for the items of this Menu page can be

restored by pressing the OK button.

Input Level

0.7V

1.0V

Normally set to 0.7 V. If white is found to spread across the screen,

set to 1.0 V. (This is effective only for RGB2.)

Frequency Display

Off

On

Set this to Off if the frequency information of the Input Signal Screen

Display is not required.

This is only available for W-VGA signal.

WVGA Type

Off

On

When it is set to On, the display area mode can be selected Full or

Real. (With RGB1 INPUT, the screen remains the same. RGB2 (ANA-

LOG) INPUT only)

WXGA Mode

Off

1280x768

1366x768

This is only available for W-XGA signal.

(RGB2 (ANALOG) INPUT only)

37