Charging the Battery Pack
Before you use the battery pack for the first time, you must use the supplied bat- tery charger to charge it for about 12 to 14 hours to bring it to a full charge.
You cannot use the transceiver while you charge the battery pack.
Caution: The supplied battery charger was designed specifically for your trans- ceiver. Use only the supplied battery charger.
Follow these steps to charge the battery pack.
1.Turn VOLUME fully counterclock- wise to OFF to make sure power is turned off.
other end of the charger into a standard AC outlet.
illus - show barrel plug/ charger. Show plug being plugged into CHRG and
AC plug about to be plugged into an AC outlet
If the RX/TX indicator lights yellow when the transceiver’s power is on and you press PUSH TO TALK, recharge the battery pack.
| illus - show | |
| PTT and | |
illus - | RX/TX lit on | |
front of | ||
show | ||
transceiver | ||
VOLUME | ||
|
2.Pull out the rubber cover over the CHRG jack on the side of the trans- ceiver, and insert the charger’s bar- rel plug into the jack. Then plug the
9