When you select the search bank, the lower limit and upper limit frequency assigned in the search bank alternate on the display.
To select another search bank, press FUNC + B.SLCT or FUNC 
to increase the search bank number or FUNC + 
to decrease it. Hold down
FUNC + 
or FUNC + 
for about 1 second to quickly move through the search bank numbers.
After choosing the search bank, follow these steps to set the lower limit and upper limit frequency.
Enter the lower limit frequency by using the
Press E to select the lower limit frequency.
Enter the upper limit frequency by using the
Press E to select the upper limit frequency.
direct entry search
You can use direct entry search to search up or down from the currently displayed frequency.
If the scanner is scanning or searching, press HOLD.
Beyond the Basics | 42 |