upward. 
or 
appears depending on the search direction.
Press FUNC + 
to decrease the frequency by one step or FUNC + 
to increase it by one step. Hold
down 
or 
for about 1 second to quickly decrease or increase the frequency.
To resume direct search, press FUNC + SEARCH or
HOLD. ( 
or 
appears on the display, showing the search direction).
storing frequencies found during direct entry search into channel memory
Follow these steps to store frequencies received during direct entry search mode or direct entry search hold mode.
Press FUNC and PGM in direct entry search mode or direct entry search hold mode. The fre- quency and lowest blank channel alternate on the display.
Press E to store the frequency into the blank channel. To select another channel, repeatedly
press FUNC + 
or 
to select the blank chan- nel you want, and then press E. You can also use the
Beyond the Basics | 44 |