Radio Shack 43-3803 6417$.5*116+0, Caller ID Messages, Deleting Caller ID Records, Care

Note: Contact your local phone company to subscribe to Caller ID with Call Waiting ser- vices.

CALLER ID MESSAGES

Display
English/	Description
Spanish
D[mýJejWb	The number of new calls and
Dk[leýJejWb	total number of incoming
	calls.
ç&'	Call information is stored in
	Caller ID memory location
	#01.
Fh_lWj[	Appears when the caller has
Fh_lWZe	blocked Caller ID information
	from being sent.
KdWlW_bWXb[	Appears when the caller is
<k[hWýZ[ýPedW	not within a Caller ID service
	area. No caller information
	appears.
9?:ýdejý	The voice message does not
WjjWY^[Z	have Caller ID message
	information.
9?:ýDeý7dWZ_h
;hheh	Appears if there was an error
	during the transmission of the
	Caller ID information.
Deý9Wbbi	No call information is stored
DeýBbWcWZW	in the Caller ID.
F_YakfýF^ed[	Appears after the system
B[lWdjWhýJ;B	dials a number when you
	press CALLBACK.
7H;7ýF?Dý	Prompts you to set the area
:7OUMA	code, remote security opera-
	tion PIN, date and day.
7H;7ýF?DýI[c#
WdW
	Appears when the system or
	CID is inactive and a mes-
	sage is waiting (if you sub-
	scribe to your phone
	company’s message waiting
	service).
9WbbýMW_j_d]ý	Appears when there is an
BbWc$[dý;if[hW	incoming call when you are
	on the phone.
C[cehoý_iý<kbb	Appears when the Caller ID
C[ceh_WýBb[dW	memory is full or the system
	reaches its maximum mes-
	sage counter.
;dZýe\ýB_ij	Appears when you have
<_dýZ[ýBWýB_ijW	reached the end of your call
	records.
HFJ	Appears when you review a
	Caller ID record from some-
	one who has called more
	than one time from the same
	number.
9Wbbý<ehmWhZ	The call was forwarded from
BbWcýI_]k_[dj[	a number set to forward all
	calls.

Display
English/	Description
Spanish
<ehmWhZý8kio	The call was forwarded from
EYkfWZeý	a number set to forward a call
	if the line is busy.
7Z[bWdj[
L?Fý7b[hjýEd	The VIP alert feature is on.
7b[hjWýL?FýEd
L?FýdejýI[j	Alerts you during reviewing
L?Fýdeý7`kijWZe	VIP calls that the mailbox has
	no VIP number set.
MW_j_d]	Appears when you press
;dý;if[hW	STOP after you delete mes-
	sages or Caller ID records.

DELETING CALLER ID

RECORDS

Follow these steps to delete an individual Caller ID record.

1.Press 6REVIEW7 to recall the record.

2.Press DELETE. :[bý9?:ýH[YehZ5ýflashes.

3.Press DELETE again to delete the record.

Follow these steps to delete all Caller ID records.

1.Press 6REVIEW7.

2.Press DELETE. :[bý9?:ýH[YehZ5 flashes.

3.Press REVIEW7until :[bý7bbý9?:5 flashes.

4.Press DELETE. Deý9Wbbi appears.

Follow these steps to delete a CID and voice message.

1.Press 6REVIEW7 to recall the CID record and voice message.

2.Press DELETE. :[býLe_Y[ýCI=5 flashes.

3.Press REVIEW7until :[b 9?:+Le_Y[5 flashes.

4.Press DELETE to delete the CID record and voice message.

Notes:

•If you decide not to delete the records, do not press DELETE and wait until the system resets to answer calls.

•If you press DELETE to confirm deletion during :[b 7bb 9?:5, all Caller ID records will be deleted, including records that have not been reviewed.

6417$.'5*116+0)

We do not expect you to have any problems with your system, but if you do, try these sug- gestions.

Problem	Suggestion
The incoming	Be sure the memory is not
message is	full.
incomplete.
The incoming	Be sure 9VOLUME8 is
message is	set to the desired sound
unclear.	level.
The system	Be sure the system is set to
does not	answer calls.
answer after
two, four, or
seven rings.
The system	Make sure the phone you
does not	use to dial the system is a
respond to the	touch-tone phone, or use a
remote opera-	pocket-tone dialer.
tion security
	Re-enter your remote opera-
code.
	tion security code, pressing
	each number for 2 seconds.
	Make sure the remote opera-
	tion security code you
	entered is correct, or try
	entering the default code of
	000. The remote operation
	security code might have
	reset to the default code due
	to a power failure or a weak
	backup battery.
The display is	The backup battery is weak.
blank.	Replace the battery (see
	“Installing a Backup Battery”
	on Page 2).
	Make sure AC power is prop-
	erly connected (see “Con-
	necting the System” on
	Page 2).
The system dis-	Make sure the AC power is
plays and	properly connected. If AC
receives Caller	power fails, the system can
ID records but	receive Caller ID records but
does not oper-	cannot operate using backup
ate.	battery power.

CARE

Keep the system dry; if it gets wet, wipe it dry immediately. Use and store the system only in normal temperature environments. Handle the system carefully; do not drop it. Keep the system away from dust and dirt, and wipe it with a damp cloth occasionally to keep it looking new.

Modifying or tampering with the system’s in- ternal components can cause a malfunction and might invalidate its warranty and void your FCC authorization to operate it. If your system is not performing as it should, take it to your local RadioShack store for assis- tance. If the trouble is affecting the telephone lines, the phone company can ask you to dis-

7