Radio Shack TAD-1027 owner manual Setting the Number of Rings, Illus. showing microphone

Page 9

43-787.fm Page 9 Monday, August 16, 1999 8:11 AM

7.When you finish, press ANSWER/ STOP/DELETE to confirm the set- tings. The TAD-1027 beeps and announces the day and time.

To check the current day/time, use a straightened paper clip to press CLOCK.

RECORDING THE OUTGOING MESSAGE

Before you can set the TAD-1027 to an- swer calls, you must record the outgoing message (OGM) the caller hears when the TAD answers a call. Your outgoing message can be up to 60 seconds long.

1.Hold down OGM/REPEAT until the TAD-1027 beeps.

Note: If memory is full, the PLAY/ SKIP indicator flashes, the TAD- 1027 announces, “Memory is full,” and you cannot record the outgoing message. Delete old messages to make room in memory (see “Delet- ing Messages” on Page 11).

2.Speak in a normal voice about 8 inches away from the microphone on the front of the TAD.

Illus. showing microphone.

Microphone

Ask for the caller’s name, phone number, and message.

Important: Do not tell callers you are not home. Instead, say that you cannot come to the phone right now.

3.The TAD-1027 automatically stops recording after 60 seconds, or you can press ANSWER/STOP/DELETE when you finish the message. The TAD-1027 beeps and automatically plays back the outgoing message.

To play the outgoing message at any time, press OGM/REPEAT. If no outgoing message is recorded, the TAD-1027 says, “No announcement.”

SETTING THE NUMBER OF RINGS

The ring select 4/7/TS switch controls how long the TAD-1027 waits before it answers a call. Slide the switch to the ap- propriate position.

Illus. showing 4/7/TS switch.

4— The TAD-1027 answers after four rings.

7— The TAD-1027 answers after seven rings.

TS (Toll Saver) — If there are new mes- sages, the TAD-1027 answers after two rings. Otherwise, the TAD answers after four rings.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents TAD-1027 Features FCC Statement Read this Before InstallationContents Installing Backup Battery InstallationIllus. showing removal of battery compartment cover Illus. showing connection of connector to battery terminalsConnecting to Power Illus. of Volume switchIllus. of to Line jack and connection to a modular jack Illus. of Answer PLAY/SKIP indicators Setting the DAY and Time PreparationIllus. showing Answer Setting the Number of Rings Illus. showing 4/7/TS switchIllus. showing microphone Basic Operation Setting the TAD-1027 To Answer CallsScreening Calls Recording Incoming MessagesPlaying Messages Deleting MessagesIllus. showing PLAY/SKIP Illus. showing Code switch Recording a MemoChanging the Remote Operation Security Code Fm Page 13 Monday, August 16, 1999 811 AM Remote Operation Using Remote CommandsRemote Command Codes Resetting the TAD-1027 TroubleshootingCare and Maintenance Lightning FCC Wants YOU to KnowFm Page 19 Monday, August 16, 1999 811 AM RadioShack Division of Tandy Corporation Fort Worth, Texas

TAD-1027 specifications

The Radio Shack TAD-1027 is a versatile and innovative answering machine that reflects the technological advances of the late 20th century. As a prominent product during its time, the TAD-1027 offered numerous features that appealed to both home and office users. Its design was compact, making it easy to place on a desk or shelf while remaining user-friendly and efficient.

One of the standout features of the TAD-1027 is its digital storage capability, allowing users to record and store up to 15 minutes of messages. This represented a significant advancement from earlier cassette-based answering machines, providing clearer audio quality and eliminating the hassle of replacing tapes. The machine's digital technology ensured that messages were easily accessible and could be played back with clarity.

The TAD-1027 was equipped with an intuitive interface that included a bright LED display, making it easy for users to keep track of incoming messages. Additionally, the unit offered various playback options, including slow playback, which allowed users to listen to messages at a more manageable speed. This feature was particularly useful for users who wanted to record important details without missing any information.

A key characteristic of the TAD-1027 was its capability for remote access. Users could retrieve their messages from any telephone, providing valuable convenience for business people on the go. This feature reflected the answering machine's versatility, making it a useful tool not just for home users but also for professionals needing to stay connected.

Furthermore, the TAD-1027 had a built-in speakerphone feature, allowing for hands-free conversations. This feature was especially appreciated in busy environments where multitasking was essential. The quality of the speakerphone ensured that users could communicate clearly without the need to hold the phone.

Overall, the Radio Shack TAD-1027 exemplified the evolution of personal communication devices during its era. With its digital storage, easy interface, essential playback features, remote access capabilities, and speakerphone utility, the TAD-1027 catered to the needs of various users. It remains a notable piece of technology history, showcasing the innovative spirit of the late 20th century in home and office communication.
Top Page Image Contents