Operating modes, Menu functions, Setting the clock

page 2 BASIC USE

Operating modes

page 3 BASIC USE

Menu functions

Handset mode

Lift the handset to get a line

Replace the handset at the end of your call

The MENU buttons take you through a range of options on the display —

Speakerphone (hands-free) mode

Group listening mode

Press to get a line

Press at the end of your call

Lift the handset to get a line

Press to listen to the call via the loudspeaker while talking into the handset

Press to toggle between group listening and handset modes

CALLER ID

STORE

TIME ACCOUNT

BABYCALL

SETTINGS

Press or to bring the menu up on the display, and to scroll through the menu options

You can do this with the handset on-hook or off-hook.

Press	to select the option on the display, and go to the next level
	For details of each feature, see the relevant page of this guide.
Press	to move back one level and to quit ‘menu mode’

… or you can simply replace the handset to quit.

… or if you wait for one minute without pressing a button, the

Switching between modes To switch from handset to speakerphone mode:

Press and hold it while you replace the handset To switch from speakerphone to handset mode:

KEYBEEP

phone will automatically quit ‘menu mode’ and show the time.

THE DISPLAY MAY BE BLANK FOR A FEW MOMENTS BEFORE SHOWING THE TIME.

Lift the handset

To switch from group mode to speakerphone mode:

Press once, release it, then press and hold it while you replace the handset

Display messages and symbols

The appears when you are using the Phone Book.

The appears when the phone is off hook (either on a call or using the menu or Phone Book).

The (on-hook dialling symbol) appears when you are dialling back a number from the Caller ID memory or the Phone Book, with the handset on the base. It disappears when you lift the handset.

The is shown when Babysitter’s Call is turned on (see page 7).

The is shown if you subscribe to the BT Call Minder service (or an equivalent service from your service provider) and a caller has left a new message in your mailbox.

Setting the clock

1	Press	until the display shows	<SETTINGS >
2	Press	so the display shows	CLCK SETTING >	05-49 P
3	Press	again		CLOCK	>AM

4Key in the current time, using the dialling keypad

The time is a four-digit number (HHMM) using the 12-hour clock

5Press if necessary to change the AM / PM setting

6Press to confirm, then to quit menu mode

Key beep		Normally, the unit will ‘beep’ whenever you press a button or key. You
		can turn this off if you prefer.
1 Press	until the display shows <KEYBEEP >

2Press

3 Press

to switch between ON and OFF

KEYBEEP ON >

02083448870

MUTED 00-27

When you mute the mouthpiece by pressing

the SECRECY button, ‘MUTED’ is shown here.

The appears when the battery needs to be replaced.

NEW Without a battery, the clock and the Caller ID functions

CALL

will not work.

This is shown when there has been an incoming call, until you have checked the caller’s ID.

When you key in a number using the dialling keypad, it is shown here. When the phone is ringing, the caller’s ID may be shown here.

Call timer — when the phone has been connected to the line for 20 seconds (either busy on a call or with no button being pressed), the duration is shown here. When you hang up, the timer stops and stays on the display for another 16 seconds.

4Press then to quit menu mode

Timer Account This shows you how much time you have spent on calls (incoming and outgoing).

1	Press	until the display shows <TIMER ACCOUNT	>
2	Press	to display the total time	01-48-09
3	Press	to quit menu mode	TOTAL

	OR, to re-set the timer to zero:		00-00-00
	Press	and hold it for 3 seconds
4			DELETED