ClearOne comm 50 user manual Create a New Device

Create A New Device

To create a new device with custom audio settings, use the following procedure:

1. Click the New button. The Add Settings to Database dialog appears (see Figure 3.14).

FIGURE 3.14 Add Settings to Database dialog

2.Adjust the audio settings as needed, or click Upload from Chat to upload and display the Chat 50’s current audio settings.

3.Use the Select 1st and Select 2nd lists to select a device type and manufacturer for the device; select either the Other or the All if no appropriate setting is available. Enter a custom name for your device in the Select 3rd entry field.

4.The Include in My Devices checkbox is selected by default to include this device in My Devices. When you are finished, click OK.

The device is now available in the My Devices and Device Setup screens.

Editing Custom Devices

To edit custom devices, select the device in the Advanced Settings: Database screen, then click the Edit button that appears instead the View button that is shown for pre-configured ClearOne devices. The Edit Database Record appears (Figure 3.15). Change the device name and/or settings as needed, then click Ok.

FIGURE 3.15 Edit Database Record dialog

26 Technical Support: 800-283-5936 Chapter 3: Using The Chat Software 26