![](/images/new-backgrounds/1200443/20044323x1.webp)
Operating your P-300
The PHOTO PHONE is designed to help you communicate easily. There are many convenient,
A. Photo Directory Set Up
You can program up to 9
1.Select the photos you wish to use. Use the photo template as a guide to cut your photos to fit the photo frames.
2.Insert photos or written names into memory button frames.
3.Place the clear plastic overlay over your photos and insert the tabs into the slots.
Office | Doctor |
Bank
| P H O T O P H O N E P - 3 0 0 | |
| A | D |
| B | E |
| C | F |
G | J | M |
H | K | N |
I | L | O |
Figure 7
B. Programming The Photo Directory
1.Lift the handset and press PROG button.
2.Enter a phone number as you would dial it.
3.Press PROG again and then press the corresponding memory button to store this number. Hang up immediately.
4.The number is now stored into memory. The memory button in the lower right corner of the frame can be programmed for emergencies. Whenever the handset is lifted, a light will guide you to that button.
Note: Press the REDIAL button to insert a pause in the numbers you are programming.
10