Operating your P-300
E
N G L
C. Memory Dialing
Pick up the handset and simply press the photo directory button to dial the phone number programmed.
Bank
Figure 8
D. Amplifier
The amplifier increases the incoming voice from 0 to 20+ decibels (dB). The graduated scale indicates the loudness of the volume setting. The amplifier is turned on by pressing the AMPLIFY button as described in the next section.
Figure 9
E. Amplify Button
Press the AMPLIFY button to turn the amplifier on. When AMPLIFY is on, it returns to your previous amplification setting and a red light will illuminate in the ring flasher area. When you hang up the handset, it automatically turns off the amplifier.
Figure 10
F. Ringer Volume
You may adjust the ringer volume of your PHOTO PHONE to suit your needs. When set on high, the ringer produces a tone that reaches approximately 75 decibels.
DIALRINGER
P | T | Off Lo Hi |
I
S
H
11