. . .
. .
. . .
.
.. .
..
...0..
. .
-
. .. ..
.. .-
INSTALLATION
Your GE 900 hlHz Cordless telephone comes with a nickel cadmium rechargeable battery pack (located in Handset). Charging takes place when the HANDSET is placed in the BASE. When fully charged, the battery pack provides suffi- cient power to enable the HANDSET to be left out of the BASE for prolonged periods and still function properly. However, to maintain adequate power, you will need to recharge the BATTERY PACK every few days by returning the HANDSET to the BASE. The HANDSET will beep and the battery low light will come on when the battery is low and needs recharging.
10 Recharge the Batteq
1.Be sure the AC POWER SUPPLY is plugged into a standard electrical outlet.
2.Place HANDSET in the BASE.
3.Before initial use, let charge for 12 hours or more,
The CHARGE LIGHT will be “ON” when the batte~ is charging.
IMPORTANT Although you can leave the
HANDSET out of the BASE for extended periods, you will need to return it to the
BASE Deriodical!v to keen the batte~
pack charged. Periodically clean the charging
contacts on the HANDSET and BASE with a soft
cloth.
NOTE: Leaving the handset charging in the base will NOT damage the battery pack.
●
●
●
●
●
●
●
●
●
●
●
●
●
●
D. Charging the Battery Pack
A’
12