GE 7906, 00016 manual Handset Setup, Display Language, Local Area Code

Handset Setup

There are five programmable menus available: Language, Local Area Code, Ringer Tone, Tone/Pulse and Factory Default. When you program these settings, make sure the phone is OFF (not in talk mode). Pressing the TONE*/exit button will remove you from the menu selection process without changing the feature you are in.

Display Language

1.Press the flash/program button until 1ENG 2FRA 3ESP shows in the display.

2.Use the CID/vol (5 or 6) button or the handset number pad to select 1 (English), 2 (French), or 3 (Spanish). The default setting is 1ENG.

3.Press the flash/program button to confirm and to advance to the next menu feature.

Local Area Code

If you enter your local 3-digit area code in the area code menu, your local area code does not display on the Caller ID (CID) list. Instead, you only see the local 7-digit number. Calls received from outside your local area code will display the full 10-digit number.

1.Press the flash/program button until AREA CODE - - -

shows in the display. The default setting is - - -.

19