GE 881, 28821xx4, 28821xx3, 28821xx6, 28821xx5, 28821xx2 Handset Sound Signals, Telephone Solutions

Page 54

Handset Sound Signals

Signal

Meaning

A long warbling tone

Signals an incoming call

(with ringer on)

 

Three short beeps

Page signal

(several times)

 

One beep every 7 seconds

Low battery warning

Troubleshooting Guide

 

Telephone Solutions

No dial tone

•Check or repeat installation steps:

Make sure the base power cord is connected to a working electrical outlet. Make sure the telephone line cord is connected to the base and the wall jack.

•Connect another phone to the same jack. If it doesn’t work, the problem might be your wiring or local service.

•The handset may be out of range of the base. Move closer to the base.

•Make sure the battery is properly charged (for 16 hours).

•Make sure the battery pack (in the handset) is properly installed.

•The handset should beep when you press the TALK button, and the charge indicator on the base should be lit when the handset rests in the cradle. If not, the battery may need to be charged.

•Place handset in charge cradle for at least 20 seconds to reset the unit.

Handset does not ring

•Make sure the handset ringer software switch is set to on.

•The handset may be out of range of the base. Move closer to the base.

•You may have too many extension phones on your line. Try unplugging some extensions.

•Check for a dial tone.

54

Page 53 Page 55
Image 54
Page 53 Page 55
Contents Page Equipment Approval Information Notification to the Local Telephone CompanyPage Interference Information FCC RF Radiation Exposure Statement Hearing Aid Compatibility HACLicensing Information for Dect ProductTable of Contents Intercom Operation Remote AccessTelephone Operation Caller ID CIDConnecting the Belt Clip Causes of Poor Reception Do not Open LightningIntroduction Before You BeginTelephone Jack Requirements Installation Important Installation GuidelinesDigital Security System Redial/format GOOG-411Tone button #pause button ButtonVoicemail indicator Base Layout Top & Front ViewsMemo button Installing the Phone Installing the Handset BatteryBase Station Answering System Setup Handset AccessAnswerer Set Prompt Language Rings to AnswerFrom the Answerer Menu Speaker Volume Message AlertSecurity Code Reviewing and Choosing the Announcement Voice InstructionRecording the Outgoing Announcement Sample Outgoing AnnouncementWhen given results When asked for a city and stateWhen asked for business name or category At any point in the callProgramming Functions Programming the TelephoneStandby Screen Phone BookAdd Records Inserting a Pause in the Dialing Sequence of a Stored NumberEdit Records Delete RecordsDialing a Number from Internal Memory Ignore The Incoming CallRoom Monitor applicable only with additional handsets Set Alarm Clock Handset Setup From the Handset Setup MenuLanguage Handset Name Ringer ToneRinger Volume VIP MelodyStoring VIP Melody Changing a Stored VIP Melody RecordReviewing And Deleting Stored VIP Melody Record Key ToneSet Day/Time Equalizer Area CodeTone/Pulse Registration De-RegistrationGlobal De-registration Select 2NO, if you do not want to de-registerTelephone Operation Visual IndicatorsDefault Setting BaseVmwi / Visual Ringer Indicator on Handset Speakerphone OperationMaking a Call Caller ID-VOLUME 6 or 5 button during a call Call TimerRinger Volume Shortcut Answering CallsFlash/Call Waiting Last Number RedialExit Paging from the Base/Group Handset to Handset PagingPaging All Handsets from a Handset Applicable only with additional handsetsMute Receiver Volume ControlIntercom Operation Do Not Disturb D-N-DReceiving an Intercom Call Advanced Intercom FeaturesUsing Intercom with External Telephone Calls Receiving an Incoming Call During an Intercom CallTwo-Way Calling Three-Way CallingTransferring External Calls to Other Handsets Caller ID CID Call Waiting Caller IDReviewing CID Records Receiving CID RecordsStoring CID Records In CID Memory Dialing a CID NumberStoring CID Records in Internal Memory Deleting a CID RecordMessage Counter Indicator Answering System OperationDeleting All CID Records Leaving a Message/Memo Screening Calls from the BaseMessage Playback To erase a message while it is playing Memory FullErasing Messages To erase all previously played Messages in a mailboxCordless Handset Remote AccessWhen the answering system picks up Screening Calls from the HandsetAccessing the Answering System from Another Location Press this buttonConnecting an Optional Headset to the Handset Changing the BatteryConnecting the Belt Clip Belt Clip and Optional HeadsetBattery Safety Precautions Display MessagesEND of List Answering System Display Messages Handset Sound Signals Telephone SolutionsCaller ID Solutions Answering System Solutions Battery SolutionsCauses of Poor Reception General Product CareWarranty Assistance Limited WarrantyThomson Inc Manager, Consumer Relations Box Indianapolis, What your warranty does not cover What your warranty coversHow you get service For how long after your purchaseProduct Registration Limitation of WarrantyHow state law relates to this warranty If you purchased your product outside the USAAC Power adaptor Accessory InformationHandset Replacement Battery Belt Clip 2813 HeadsetIndex GOOG411 Index Vmwi / Visual Ringer Indicator on Page Page Rd Street

0007, 28821xx2, 28821xx3, 28821xx5, 28821xx6 specifications

The GE 28821 series, encompassing models such as the 28821xx4, 28801, 28821xx6, and 881, represents a significant advancement in communication technology, particularly in the realm of two-way radio systems. These models, designed primarily for professional and industrial use, have gained recognition for their durability, reliability, and advanced features, making them integral tools in various sectors, including construction, public safety, and event management.

One of the standout characteristics of the GE 28821 series is its robust construction. Engineered to withstand the rigors of demanding environments, these radios are built with durable materials that ensure longevity and resilience against harsh weather conditions and rough handling. This series also features a compact design, which allows for easy portability and handling, making them ideal for on-the-go communication needs.

In terms of technology, the GE 28821 series incorporates state-of-the-art frequency modulation capabilities, ensuring clear and reliable transmission even in congested areas. The advanced noise cancellation technologies utilized in these models enhance audio clarity, allowing users to communicate effectively without interruptions from background noise. Additionally, the radios support multiple channels, enabling users to switch frequencies effortlessly for optimal communication versatility.

Another notable feature is the battery efficiency of the GE 28821 series. These models are equipped with powerful batteries that offer extended operational time, minimizing downtime and the need for frequent recharging. The series also supports quick battery swap technology, allowing users to replace batteries swiftly during critical operations.

The user interface is designed with practicality in mind. Featuring large buttons and clear displays, the GE 28821 radios allow users to navigate functions easily, even in low-light conditions. Many models in this series also include programmable buttons, enabling customization to suit specific operational requirements.

Safety features are an essential aspect of the GE 28821 series. Many models come equipped with emergency signaling capabilities, which can alert coworkers or supervisors in critical situations. This feature enhances workplace safety, making these radios vital tools for first responders and personnel operating in hazardous environments.

In summary, the GE 28821 series, including models 28821xx4, 28801, 28821xx6, and 881, stands out due to its robust design, advanced communication technologies, energy efficiency, and user-friendly interface. These radios provide users with dependable, efficient, and versatile communication tools that are essential for numerous professional applications, enhancing operational efficiency and safety in the field.
Top Page Image Contents