Wall Mount Installation

1. Plug one end of the short telephone

line cord into the jack marked PHONE LINE on the back of the unit, and plug the other end into a modular wall jack.

2.Connect the power supply adapter to the POWER 12V DC jack on the back of the unit, and plug it into an AC outlet.

3.Slip the mounting holes over the wall plate posts and slide the unit down firmly into place. (Wall plate not included.)

4.Set the TONE/PULSE switch to TONE you if have touch-tone service or to PULSE if you have rotary dial service.

5.Select either OFF, LO, or HI (on the base) for the preferred ringer volume. If you select OFF, the handset will not ring with incoming calls or paging, but the TALK button will light.

6.Place handset in the base to charge for 8 hours. The CHARGE light comes on indicating that the battery is charging.

A low battery warning (BATT LOW light and warning tone) will remind you to charge the handset batteries for at least 8 hours.

5 4

PAGE/FIND

AUXILLIARY

CHARGER

CHARGE

IN USE