10Handset Setup
4.Press 
to enter the menu and start the handset registration. Wait Base searching 1”is displayed. If the handset has located the base, it may display (depending on EEPROM settings), the base identification number (RFPI).
5.Handset Registered is displayed and the handset goes back to idle.
6.The DECT indicator light on the Base stops flashing when a handset has successfully been registered.
If the handset does not locate the base, it goes back to idle mode. Try again.
If the handset emits a double beep, it means that the base has reached the maximum number of 5 subscribed handsets.
Handset Synchronization*
1.After handset is registered, wait 5-7 seconds until
RSS synchronization icon briefly appears on the handset display. This indicates that the handset and base are synchronized to each other.
2.Next you will see the RSS Service Wizard which
will guide you step by step through setup of Weather and Weather Alerts. There are some useful channels
NOTE: Your handset will automatically display the RSS synchronization icon for a few seconds when the feeds are updated at approximately 15 minute intervals. During this automatic process you will not be able to search or view your RSS feeds.
*Thomson Inc. does not warrant that the content of any website or RSS feed transmitting content to this product (InfoLink Phone) will be uninterrupted or error free. Access to streaming content through this device is subject to provider availability. Thomson Inc. does not endorse any Internet- based content or RSS feeds maintained by
a third party that may be accessed using this device.