Dual Mode Cordless Phone for Yahoo! Messenger with Voice
Charge the Handset Battery Pack
1.Slide the cover off the battery compartment.
2.Insert the battery pack (included). The plastic end of the wire will fit into the slot at the lower side of the compartment. It only fits one way, do not force the connection.
3.Slide the cover on until it snaps into place.
4.Place the handset into the
NOTE: The handset may become warm during the initial charge.
Battery slot
Figure 3-3: Battery pack
installed
Powering On the Handset
When the handset is fully charged, press and hold down the Power/End Call key to power on the handset until the standby screen fades.
Proceed to the next section, “Install the PC Phone Software.”
Figure 3-4: Handset on the
Charger
Chapter 3: Get Connected | 16 |
Charge the Handset Battery Pack