Appendix A: Troubleshooting
Dual Mode Cordless Phone for Yahoo! Messenger with Voice
This appendix provides solutions to problems that may occur during the installation and operation of the
Common Problems and Solutions
1.There is no dial tone when I press the Call key. Do the following until you get a dial tone:
A.Make sure that the telephone line cord is properly connected to the LINE port of the USB base station and the telephone wall jack.
B.Move the handset closer to the USB base station.
C.Place the handset on the charger and recharge the batteries.
2.The Base/Handset Link icon is flashing on the handset’s display screen. Do the following until the icon is not flashing:
A.If the handset says it is not registered, then refer to “Chapter 4: Use the
B.Move the handset closer to the USB base station.
C.Check to see if the USB base station is powered on. Make sure the power adapter is properly connected to the power port of the USB base station and an electrical outlet.
Appendix A: Troubleshooting | 44 |
Common Problems and Solutions