GE 29870 Series manual Before YOU Begin, Parts Checklist, Modular Jack Requirements

BEFORE YOU BEGIN

PARTS CHECKLIST

Make sure your package includes the following items:

+

_

ALL NEW

PLAY / STOP

	1	2	3
	4	5	6
	7	8	9	AC power supply	Line cords
	*	0	#
Handset	Base			Coiled cord

MODULAR JACK REQUIREMENTS

You need an RJ11 type modular jack, which is the most common type of phone jack and might look like the one pictured here. If you don’t have a modular jack, call your local phone company to find out how to get one installed.

INSTALLING THE BATTERY

In the event of a power loss, a 9-volt battery (not included) enables the answerer to retain messages stored in memory. To install the battery:

1.Remove the battery compartment door on the bottom of the unit by loosening the screw with a Phillips screwdriver. Lift the door.

2.Connect a fresh 9-volt alkaline battery (not included). The large and small contacts on the battery clip and the battery will interlock. Once connected, place the battery inside the battery compartment.

3.Replace the battery compartment door and tighten the screw.

NOTE: If the battery is low or not installed, the unit announces “Low Battery” at the end of your messages.

Battery compartment door

	-	+	Battery clip
Battery	-	+

4