GE 29893 manual Inserting a Pause in the Dialing Sequence, Changing a Stored Number

INSERTING A PAUSE IN THE DIALING SEQUENCE

Press the REDIAL/PAUSE button to insert a delay in the dialing sequence of a stored telephone number when a pause is needed to wait for a dial tone (for example after you dial 9 for an outside line, or to wait for a computer access tone). Each pause counts as 1 digit in the dialing sequence.

CHANGING A STORED NUMBER

Use the same procedure to change a stored number as you do to store a number–you’re just replacing the phone number with a different one.

DIALING A STORED NUMBER

1.Pick up the handset or press SPEAKER.

2.Press MEM DIAL. MEMORY DIAL=? is displayed.

3.Press the memory location number (0-9). The number dials automatically.

PREVIOUS button				NEXT button
ERASE button
					N
					E
					W
					C
					ALL
MENU					MEMO
	ENT				TING
	ER	MESSAGE			GREE
ERASE	DIAL				VOL +
		ST OP
					ON/OFF
MEM DIAL STORE		MESSAG ES/CALLER ID			VOL -
					FLASH
A	1	ABC 2			DEF 3
QUICK DIAL
					REDIAL/PAUSE
B	GHI 4	JKL 5			MNO6
	RS 7		8		HOLD
					YZ 9
C	PQ	TUV			WX
MEM DIAL	*				# SPEAKER
		OPER 0
	TONE
		mic
MEM DIAL		REDIAL/PAUSE
button		button

DIALING A QUICK DIAL NUMBER

1.Pick up the handset or press SPEAKER.

2.Press A,B, or C. The number dials automatically.

IMPORTANT: If you make test calls to emergency numbers, remain on the line and explain the reason for the call. Also, make these calls in off-peak hours, such as early morning or late evening.

REVIEWING STORED NUMBERS

1.Press MEM DIAL. MEMORY DIAL=? is displayed.

2.Use NEXT or PREVIOUS to scroll through the memory locations.

27