GE 28128 manual Programming the Handset, My Base, To edit the name, To deregister the device

3.Use the or button to scroll to desired device.

4.Press the Select (SKL) button to select.

To edit the name;

1.Use the or button to scroll to Edit Name.

2.Press the Select (SKL) button to confirm, use the number keys to enter the cell phone name (maximum 15 characters).

3.Press the Store (SKL) button to save your selection. You will hear a confirmation tone.

To deregister the device;

NOTE: Once the device has been deregistered, you must reregister it again in order to re-connect to base.

1.Use the or button to scroll to Deregister.

2.Press the Select (SKL) button to confirm. Deregister? shows on the display.

3.Press the Yes (SKL) button to confirm.

My Base

From the Bluetooth menu:

1.Use the or button to scroll to My Base, the information for the base shows on the display.

2.Press the Select (SKL) button to change the name or PIN code.

3.Press the Store (SKL) button to confirm.

Programming the Handset

NOTE: Menu settings on the handset and on the base are separate and do not interface with each other, which means changing menu settings on the handset affects ONLY the settings on the handset.

There are three programmable menus available: Alarm, Phone Settings, and Sound Settings.

Alarm

Set an alarm, then program the snooze time, occurance, and melody preferences.

1.Make sure your handset is OFF (not in talk mode).

2.Press the Menu (SKL) button to enter the main menu.

3.Use the or button to scroll to Alarm.

25