INSTALLATION - WALL MOUNTING
1. Turn | telephone | cradle | over and | ,4 | 4A | |
Dush | release | door | off | in direction | ~~ | I* |
II | ||||||
of arrow. Remove | CRADLE |
|
| |||
BOTTOM.
2.Locate CORD WRAP POST and unwrap CORD completely from base.
3.Feed plug and about 2 inches of straight cord thru hole in CORD
WRAP POST
4.Wrap remaining straight CORD around CORD WRAP POST leaving enough to go down and through the restrainer at the coiled cord end of the cradle.
5.Attach cradle bottom to CRADLE TOP. Be sure the coiled cord aligns with the CO/~~D CORD graphics on the underside of the CRADLE TOP. Replace release door to secure cradle.
NOTE: There is only one configuration in which the halves fit together properly.
6.Connect coiled end of CORD to ~A~DS~Tand then, plug straight end of cord in wall phone modular jack.
7.Slip CRADLE over WALL PMTE
You are now ready to try your new telephone.