GE 2-9200 manual Installation Desk or Tabletop, Set PULSflONE Switch to

Page 6

INSTALLATION - DESK OR TABLETOP

Telephone is packaged for desk use,
to install do the following:			/
			/
			H%
1. Plug coiled	end of	CORD into
HANDSET	MODULAR	JACK	4
			4

2.Plug straight end of cord into

MODULAR (RJI IC) WALL JACK.

3.Set RINGER Switch to HI ● LO = Sound will be lower.

● OFF=Telephone will not ring.	+:@gll

TONE. If dialing cannot be accomplished, switch to PULSE.

You are now ready to try your new telephone.

Image 6

Contents Page Page Telephone Features IntroductionTelephone Controls Telephone Outlet Requirements Forquickcall-back of last numberdialedInstallation Desk or Tabletop Set PULSflONE Switch toInstallation Wall Mounting Locate Cord Wrap Post and unwrap Cord completely from baseHOW to Make and Receive Calls Pick up HandsetService Checklist Case of DifficultyProductcare Service TWO-YEAR Limited Warranty Any defect in material or workmanshipFCC Registration Information Communications Commission and is in compliance with partsInterference Information May cause undesired operation