Bottom Panel Features
I/O Connector | Hand Strap Slot |
Hand Strap Slot
There is an adjustable, elastic hand strap available for purchase with the Dolphin 7600 terminal. When installing the hand strap, you loop the elastic strip through this slot. For instructions, see Attaching the Hand Strap on page
I/O Connector
The I/O mechanical connector is designed to work exclusively with Dolphin 7600 peripherals and cables. This connector powers the terminal, charges the main battery, and facilitates communication. This connector supports full speed USB 1.1 communication (up to 12 Mbps) and
Through this connector, you can communicate with a host workstation via Microsoft ActiveSync; see ActiveSync Communication on page
The I/O connector supports the following signals:
•Data Carrier Detect
•Received Data
•Transmitted Data
•Data Terminal Ready
•Signal GND
•Data Set Ready
•Request To Send
•Clear To Send
•Ring Indicator
•USB GND
•USB +5V
•USB D+
•USB D-
Note: Signals referenced are for a DTE device.
3 - 14 | Rev D | Dolphin® 7600 User’s Guide |
| 11/20/2007 |
|