Honeywell 7600 manual Battery Charging, Recommendations for Storing Batteries, Charging Process

Page 89

Battery Charging

Inserting and Removing Battery Packs

To insert a battery pack, place the end of the battery without the locking tab into the bottom of the charging pocket and snap the battery into place with a hinging motion.

To remove a battery pack, push the locking tab down and pull the battery away from the charging slot with a hinging motion.

Charging Process

The QuadCharger charges Dolphin 7600 Li-ion battery packs in four hours. Each charging slot works independently of the other three. As battery packs charge, the charging circuitry follows the two-step charging process (CC-CV) that is recommended for Li-Ion batteries. The process monitors changes in temperature, current, and voltage.

Temperature

The QuadCharger charges Dolphin 7600 Li-ion battery packs in four hours when charged within the recommended temperature range of 50° to 95° F (10° to 35°C). Temperature has a significant effect on charging. For best results, battery packs should be at room temperature before inserting in the QuadCharger.

!QuadCharger stops charging if the battery temperature is greater than 40°C but will begin charging again when the battery temperature is less than 40°C.When the battery temperature exceeds 40°C, the QuadCharger may exceed the stated four-hour charge time. The

To Charge Batteries in the QuadCharger

1.Supply the QuadCharger with power and turn the power switch on.

2.Insert batteries into the appropriate slots.

The Status LED for each slot turns orange to indicate that the battery is properly seated and has begun a charge cycle.

3.When the Status LED turns green, the battery in the slot has completed charging.

Recommendations for Storing Batteries

To maintain top performance from batteries, follow these storage guidelines:

•Avoid storing batteries outside of the specified temperature range of -4 to 122° F (-20 to 50°C) or in extremely high humidity.

•For prolonged storage, do not keep batteries stored in a charger that is connected to a power source.

Dolphin® 7600 User’s Guide	Rev D	9 - 3
	11/20/2007

Image 89

Contents User’s Guide With Microsoft Windows CE Trademarks DisclaimerTable of Contents Using the Image Engine Dolphin Mobile Mount Rev D Agency Approvals Dolphin 7600 Terminals with 802.11b/g and/or BluetoothLabel Locations Molded-in TextLaser Safety Label Regulatory and Safety Approvals for all Dolphin TerminalsLED Safety Statement Parameter SpecificationFCC RF Radiation Exposure Statement Dolphin RF Terminal-802.11b/g and/or BluetoothFCC Compliance Canadian Compliance TTE Compliance Statement-802.11b/g and/or BluetoothFor European Community Users Waste Electrical and Electronic Equipment InformationMicrowaves Rev D Out of the Box Getting StartedIcons in the Command Bar Command BarDesktop Status Icon MeaningPop-Up Menus Using the StylusSelecting Programs Using Windows Explorer Dolphin 7600 Wpan Dolphin 7600 WPAN/WLAN Standard Terminal ConfigurationsTerminal Hardware Overview Front Panel Features Display Backlight Removing the Screen Protector Using Screen ProtectorsCredit Card Installing Your Screen Protector Releasing Paper Screen Calibration tab Back Panel Features Side Panel Features Installing Memory Cards Top Panel FeaturesAccess Door Image Engine WindowDolphin 7600 User’s Guide Rev D 11/20/2007 Hand Strap Slot Bottom Panel FeaturesConnector Attaching the Hand Strap Using the Accessory AttachmentAttaching a Belt Clip Dolphin 7600 Peripherals Dolphin 7600 AccessoriesMain Battery Pack Battery PowerStorage Guidelines Managing Main Battery PowerGuidelines for Battery Use and Disposal Charging Internal Backup BatterySuspend Mode Resetting the TerminalTap Start Settings Control Panel Memory tab Care and Cleaning of the Dolphin TerminalTap Start Settings Control Panel double-tapFormat Ipsm Changing the Memory AllocationDolphin 7600 Terminal Technical Specifications Weight DimensionsConstruction StructuralRev D Overview Using the KeyboardsSuspend/Resume SuspendModifier Keys Function KeysIcon Keyboard Status Alpha/Numeric IndicatorKey Description Key Numeric KeyboardNavigation Keys Buttons Column Matching Hardware Button P1-P4 Hardware Application ButtonsLeft RightToggling Between Alpha and Numeric Modes Alpha ModeNumeric Mode Key Shift Functionality in Numeric Mode Key Blue Key Combinations Alpha ModeKey Character Uppercase Double-tap SFT FunctionsKey Red Key Combinations Key Alpha Keyboard Shift Functionality in Alpha ModeKey Red Key Combinations Key NUM Lock Mode Rev D Depth of Field Using the Image EngineAvailable Image Engines Symbology Type Symbology Name 1D Symbologies Supported Bar Code Symbologies2D Symbologies Composite CodesActivating the Engine Using DemosDecoding LEDsOmni-Directional Scanning Positions Sample Bar CodesUploading Images Capturing ImagesTaking an Image Rev D Communication Options Installing Additional SoftwareCommunication Connecting the Power Cable Connecting the USB CableSetting Up the Host Workstation Hardware Requirements for SetupActiveSync Communication Communication TypesCommunicating with the Dolphin Terminal Setting Up the Dolphin TerminalSynchronizing with the Host Workstation Exploring the Terminal from the WorkstationAdding Programs via ActiveSync If the File is an InstallerIf the File is Not an Installer Connecting the Terminal to a Wireless Network Wireless RadiosConfiguring the Wlan Radio Wlan 802.11b/g RadioAdding Programs From the Internet Transferring Files and Information Infrared CommunicationIrDA Port Location Tap Beam File Tap Start Programs Beam FileTap Start Control Panel ActiveSync Using ActiveSync for IrDA CommunicationRev D Enabling the Bluetooth Radio Bluetooth ManagerTab Window Description See AboutBT Service Tab Setting TabSerial Port Tab Service on another deviceConnecting to Bluetooth Printers Select Serial Printer and tap OK Rev D Connecting to Other Bluetooth Devices Scan Device Window Service Found device contains the following service IconPopup Menu Tap Start Settings Control Panel double-tapActiveSync Bluetooth ActiveSyncDolphin HomeBase Terminal Well Front PanelDock LED Rubber FeetPivot Connector Powering the Dolphin HomeBaseBack Panel USB PortChecking Battery Power Charging the Main BatteryControl Panel double-tapPower Inserting a TerminalMounting Guidelines Back Panel DimensionsMounting the Dolphin HomeBase Bottom Panel Dimensions Dolphin HomeBase Technical Specifications Rev D Dolphin QuadCharger Power LEDCharging Slots Status LEDsPower Switch Supplying Power to the QuadChargerPower Supply Connector Inserting and Removing Battery Packs Battery ChargingTemperature Recommendations for Storing BatteriesDIN Rail Dimensions Bottom Panel Mounting DimensionsMounting the QuadCharger Mounting LocationProblem Issue TroubleshootingDolphin QuadCharger Technical Specifications Out of the Box Dolphin Mobile MountRev D Mounting Rev D Online Product Service and Repair Assistance Product Service and RepairNorth America/Canada Technical AssistanceOnline Technical Assistance For Further Information How to Extend Your Warranty Limited WarrantyRev D Page Hand Held Products, Inc