Intel D865GRH manual Atapi CD-ROM Drives, Submenu shown in is for setting Atapi CD-ROM drives

Using the BIOS Setup Program

ATAPI CD-ROM Drives

Main	Advanced	Security	Power	Boot	Exit
1st Drive			[xxxxxxx]
2nd Drive			[xxxxxxx]

Specifies the boot sequence from the available devices. Select the boot device with UpArrow or DownArrow key. Press Enter to set the selections as the intended boot device. ARMD = ATAPI Removable Media Device.

← →	Select Screen
↑ ↓	Select Item
Enter	Select < Sub-Menu
F1	General Help
P9	Setup Defaults
F10	Save and Exit
ESC	Exit

The submenu shown in Table 33 is for setting ATAPI CD-ROM drives.

Table 33. ATAPI CD-ROM Drives Submenu

Feature	Options	Description
1st ATAPI CD-ROM Drive	Dependent on installed	Specifies the boot sequence from the available
(Note)	ATAPI CD-ROM drives	ATAPI CD-ROM drives. To specify boot sequence:
		1.	Select the boot device with <↑> or <↓>.
		2.	Press <Enter> to set the selection as the
			intended boot device.

Note: This boot device submenu appears only if at least one boot device of this type is installed. This list will display up to four ATAPI CD-ROM drives, the maximum number of ATAPI CD-ROM drives supported by the BIOS.

83