Intel D865GRH manual Connecting the Front Panel Header, Connecting USB 2.0 Headers

Installing and Replacing Desktop Board Components

Connecting the Front Panel Header

Before connecting the front panel header, observe the precautions in “Before You Begin” on page 25. Figure 13-E on page 38 shows the location of the front panel header. Table 5 shows the pin assignments for the front panel header.

Table 5. Front Panel Header (J9J1)

Pin	Signal	In/Out	Description
	Hard Drive Activity LED
1	HD_PWR	Out	Hard disk LED pull-
			up (330 Ω) to +5 V
3	HDA#	Out	Hard disk active LED
	Reset Switch
5	Ground		Ground
7	FP_RESET#	In	Reset switch
9	+5 V	Out	Power

Pin	Signal	In/Out	Description
	Power LED
2	HDR_BLNK_GRN	Out	Front panel green
			LED
4	HDR_BLNK_YEL	Out	Front panel yellow
			LED
	On/Off Switch
6	SWITCH_ON#	In	Power switch
8	Ground		Ground
10	N/C		Not connected

Connecting USB 2.0 Headers

Before connecting USB 2.0 headers, observe the precautions in “Before You Begin” on page 25. Figure 13-F and -G on page 38 shows the location of the USB 2.0 headers. Table 6 shows the pin assignments for the headers.

Table 6. USB 2.0 Headers (J9F1 and J9H1)

	USB Port A
Pin		Signal Name
1		Power
3		D-
5		D+
7		Ground
9		Key (no pin)

	USB Port B
Pin		Signal Name
2		Power
4		D-
6		D+
8		Ground
10		Not connected

Note: USB ports may be assigned as needed.

39