Samsung PE40C Wired Network Settings, Automatic Network Settings, Manual Network Settings

6Network

6.1.2 Wired Network Settings

MENU [m] Network Network Settings ENTER [ ]

Set the network connection to use Internet services such as perform software upgrades.

Network Settings

No network cable or Samsung Wireless LAN Adapter connected.

Please plug in a network cable or a Samsung Wireless LAN Adapter.

Start

Cancel

The displayed image may differ depending on the model.

Automatic Network Settings

Use the Automatic Network Settings when connecting your product to a network that supports DHCP. To set up your product cable network connection automatically, follow these steps.

How to set up automatically

1

2

Go to the Network Settings screen.

Select Start, press [ ], and then press [ ] again.

3The network test screen appears and verifies the network connection. When the connection has been verified, the “Internet is connected successfully.” message appears.





If the connection process fails, check the LAN port connection.

If the automatic process cannot find the network connection values or if you want to set the connection manually, go to the next section, Manual Network Setup.

Manual Network Settings

Use the Manual Network Settings when connecting your product to a network that requires a Static IP address.

Getting the Network Connection Values

To view the Network connection values on most Windows computers, follow these steps.

1Right click the Network icon on the bottom right of the screen.

2In the pop-up menu that appears, click Status.

6 Network 136