7System

7.13.8Lamp Schedule

Enables the lamp value to be adjusted to a user-specified value at a specified time in MDC mode.

Off / On

7.13.9OSD Display

Displays or hides a menu item on the screen.

Source OSD / No Signal OSD / MDC OSD

7.13.10 Power On Adjustment

You can set the warm-up time for the screen to turn on after the power button is pressed. (Range: 0 – 50

seconds)

A warm-up time that is too short may damage the product due to overvoltage.

7.13.11 Temperature Control

This function detects the internal temperature of the product. You can specify the temperature range that is acceptable.

The default temperature is set to 77C.

The recommended operating temperature for this product is 75 to 80C (based on an ambient temperature of 40C).

The screen will become darker if the current temperature exceeds the specified temperature limit. If the temperature continues to rise, the product will power off to prevent overheating.

7 System 161

Page 161
Image 161
Samsung PE40C Lamp Schedule, OSD Display, Power On Adjustment, Temperature Control,  Source OSD / No Signal OSD / MDC OSD