Samsung PE40C user manual Other issue

13 Troubleshooting Guide

Other issue
The product smells like plastic.	The plastic smell is normal and disappears over
	time.
The monitor appears tilted.	Remove and then attach the stand again to the
	product.
Audio or video cuts out intermittently.	Check the cable connection and connect it
	again if required.
	Using a very hard or thick cable may corrupt
	audio and video files.
	Make sure cables are flexible enough to ensure
	durability. When mounting the product onto a
	wall, it is recommended to use right-angle
	cables.
Small particles are found on the edges of the	The particles are part of the product design.
product.	The product is not defective.
The PIP menu is not available.	The menu is enabled or disabled depending on
	the Source mode.
	Refer to page 152 for details about the PIP
	menu.
When I try to change the PC resolution, a	To resolve the issue, change the PC resolution
message Not valid mode appears.	to a resolution supported on the display.
	The message Not valid mode appears if the
	input source resolution exceeds the maximum
	resolution of the display.
There is no sound from the speakers in HDMI	DVI cables do not transmit sound data.
mode when a DVI-HDMI cable is connected.	Make sure to connect the audio cable to the
	correct input jack to enable audio.
HDMI Black Level is not functioning properly	This function is available only when a source
on an HDMI device with YCbCr output.	device, such as a DVD player and STB, is
	connected to the product via an HDMI (RGB
	signal) cable.

13 Troubleshooting Guide 273