Connecting the DVC-2000 VideoPhone

A.Place the DVC-2000 VideoPhone in a location where you can easily connect to a phone jack, power outlet, and to your router or gateway.

B.Attach the supplied Ethernet cable (blue) to the blue colored port labeled ETHERNET on the DVC-2000 and connect the other end to your Ethernet network device (hub, switch, router, or broadband modem).

C.Attach the supplied standard telephone cable (grey) to a telephone wall jack and connect the other end to the grey port labeled PHONE on the DVC-2000.

D.Optional: If you want to use a television instead of the built in video display screen, connect the supplied yellow and white RCA cables to the yellow and white RCA connectors on the DVC-2000 and to the matching audio/video jacks on the television or VCR.

Note: You must toggle the TV/LCD switch on the side on the unit if you want to use the television output.

E.Plug the supplied AC power cable into an AC outlet and then connect the other end to the DVC-2000.

D B C E