D-Link DPH-10U specs

When Echo123 is added, click on the chat button as shown below.

You will see the following chat screen and you should enter “callme” and press the Enter key on your keyboard.

Within 10-20 seconds, you should see the following screen, and the DPH-10U VoIP USB Phone should ring. Pick up the handset and follow the instructions. The Echo Test Service will ask you to leave a message which will be played back immediately. This will help you verify that the DPH-10U VoIP USB Phone, DPH-10U Utility and DPH-10U Device are all connected and installed properly.